Self-Propagating Ceramic Composite Elbow

As a Wear Resistant Steel Pipe supplier for 43 years, Jiangsu Jianghe owns Self-propagating Wear Resistant Pipe. Ceramic Lined Pipe is cast in one piece with ceramic material, which can be cut and welded at will, and the installation is very convenient. This pipeline has many advantages that are worth using. It has the characteristics of wear resistance and high temperature resistance. Temperature resistance up to 1000 ℃. Generally, ordinary steel pipes can be used for 3 months, and Ceramic Pipe Fittings can be used for 1 year. Moreover, the weight of the pipeline is 30% lighter than that of ordinary steel pipes, which can save 20% of the construction cost; the installation is simple, the installation speed can be increased by 30%, and the labor cost can be saved by 10%.

  Product Introduction  

This ceramic pipeline is composed of ceramic layer, transition layer and steel pipe layer from the inside to the outside. Among them, the ceramic layer is subjected to a high temperature above 2000 ℃ at 1000 revolutions/min to form a highly dense ceramic pipe.

The ceramic pipe produced by self-propagating technology has good corrosion resistance, wear resistance, high temperature resistance and other properties, and at the same time guarantees the performance of the pipe that can be cut and welded at will.It can withstand high temperature without deformation

  Product performance characteristics  

1. Wear resistance

The wear life is more than 10 times higher than that of carbon steel pipes

2. Temperature resistance

Ordinary steel pipe layer can withstand 900℃

The stainless steel pipe layer can withstand above 1000℃

3. Acid resistance

Acid resistance is 96%-98%, the same as corundum ceramics

4. Corrosion resistance

Can stainless steel year-on-year

5. Easy to install

Can be cut and welded arbitrarily

6, light weight

Its density is 3.9g/cm³, which is only half that of steel, which can greatly reduce the equipment load

  Specifications  

Brand: Jianghe

Manufacturer: Jiangsu Jianghe Machinery Manufacturing Co., Ltd.

Pipe diameter: ≥DN80

Steel pipe thickness: ≥6mm

Steel pipe material: Q235 or stainless steel

Ceramic thickness: Generally 3mm～5mm, please communicate with customer service for others

Connection method: flange, welding, V-type connector

Working pressure: Normally 1.0MPa, please communicate with customer service for other pressures

Operating temperature: ordinary steel pipe ≤900℃, stainless steel pipe ≥1000℃

Bulk density: 3.9g/cm³

  Manufacturers provide services  

1. Free technical answers

2. Free CAD or 3D drawing

3. Paid surveying and mapping services