Brand: JiangHe
Packaging: export package
Productivity: unlimited
Transportation: Ocean,Land,Express,Express
Place of Origin: China
Supply Ability: Delivery
Port: Shanghai port
Payment Type: D/P
Incoterm: EXW
As a 43-year-old manufacturer of Abrasion Resistant Pipe Fittings, Jiangsu Jianghe owns Ceramic Lined Steel Pipe. The wear-resistant ceramic patch elbow is made of q235 material (can also be customized on demand), lined with alumina ceramic patch. Some customers worry that the tiles on the inside of the pipe will fall off, affecting the service life of the pipe. No need to worry about this. The ceramic patch of Jiangsu Jangho Ceramic Lined Steel Pipe adopts JH3.0 patch technology, adopts imported glue, and is pasted by hand to ensure that the ceramic patch does not fall off.
Product Introduction
The ceramic patch wear-resistant pipe is composed of three layers: outer steel pipe layer, corundum layer and ceramic adhesive layer. From the surface, the internal ceramic layer is white. Ceramics are generally 95 ceramics, and the temperature is generally lower than 200 ℃. High wear resistance and long service life.High Wear resistant Hardox Wear plate Wear Resistant Hardox Plate 6on6 Hardox Wear Plate
High Wear resistant Hardox Wear Plate
At present, the commonly used ceramic composite pipe lining ceramic plates are: ceramic block, dovetail mutual pressure, welding type, mosaic, card slot, etc.
resistant pipeline of ceramic chip coal washing plant Coal washing plant pipeline Slime water wear-resistant pipeline Aluminum oxide Wear Resistant Pipe
Product performance
1. Large hardness
Rockwell hardness HRV 80-90
2. High wear resistance
Wear resistance is equivalent to 20-30 times of high manganese steel
3. Light weight
Its density is 3.9g/cm³, which is only half that of steel, which can greatly reduce the equipment load
4. Imported glue
Magbao imported glue, bonding strength: 10Mpa, working temperature: -60℃ to +250℃, welding type, wear resistance up to 800℃
Specifications
Technical parameters of wear-resistant ceramic pipes
Brand: Jianghe
Manufacturer: Jiangsu Jianghe Machinery Manufacturing Co., Ltd.
Pipe diameter: ≥DN100
Steel pipe thickness: ≥4mm
Steel pipe material: Q235 or stainless steel
Ceramic thickness: 4mm, 6mm, 8mm, 10mm, etc.
Connection method: flange, welding, casing, V-connector
Working pressure: ≤1.0MPa (other pressures need to be communicated with customer service)
Ceramic sheet technical indicators
Ceramic marking: 92-95
Bulk density: 3.9g/cm³
Tensile strength: 1030MPa
Flexural strength: 212MPa
Hardness HRV: 80-90
Manufacturer Service
1. Free technical answers
2. Free CAD or 3D drawing
3. Paid surveying and mapping services
Product Categories : Wear Resistant Pipe > Ceramic patch wear-resistant tube
Product Introduction
The inner ceramic composite pipe is composed of three layers: outer steel pipe layer, corundum layer, and ceramic glue layer. The inner ceramic layer is white from the surface. The ceramic is generally 95 ceramic, and the temperature is generally below 200°C.
At present, the common ceramic sheets lined with ceramic composite pipes are: ceramic block, dovetail mutual pressure, welding type, mosaic, card slot and so on.
Product performance
1. Large hardness
Rockwell hardness HRV 80-90
2. High wear resistance
Wear resistance is equivalent to 20-30 times of high manganese steel
3. Light weight
Its density is 3.9g/cm³, which is only half that of steel, which can greatly reduce the equipment load
4. Imported glue
Magbao imported glue, bonding strength: 10Mpa, working temperature: -60℃ to +250℃, welding type, wear resistance up to 800℃
Specifications
Technical parameters of wear-resistant ceramic pipes
Brand: Jianghe
Manufacturer: Jiangsu Jianghe Machinery Manufacturing Co., Ltd.
Pipe diameter: ≥DN100
Steel pipe thickness: ≥4mm
Steel pipe material: Q235 or stainless steel
Ceramic thickness: 4mm, 6mm, 8mm, 10mm, etc.
Connection method: flange, welding, casing, V-connector
Working pressure: ≤1.0MPa (other pressures need to be communicated with customer service)
Ceramic sheet technical indicators
Ceramic marking: 92-95
Bulk density: 3.9g/cm³
Tensile strength: 1030MPa
Flexural strength: 212MPa
Hardness HRV: 80-90
Manufacturer Service
1. Free technical answers
2. Free CAD or 3D drawing
3. Paid surveying and mapping services
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now