Stainless Steel Ceramic Wear Resistant Elbow Product

Let's take a look at this product first. The Ceramic Wear Resistant Elbow custom-made phone produced by Jiangsu Jianghe has several types of ceramic elbows. One is Self-propagating Wear Resistant Pipe, which is what we often call Self-Propagating Ceramic Pipe Fitting, some customers may not have heard of it, but they know it today. The other is Ceramic Lined Steel Pipe. These two ceramic elbows are completely different products. Like sintered ceramic elbows, it is an integral casting type. It is light in weight and can be cut at will, which can save installation costs and maintenance costs. The ceramic patch elbow is an outer steel pipe, and the inside is a combination of ceramic sheets. The ceramic sheet adopts JH3.0 patch technology, so that the ceramic sheet does not fall off, so that the service life can be extended a lot and the wear resistance of the pipeline can be increased.

  Product Introduction   

The ceramic patch wear-resistant pipe is composed of three layers: outer steel pipe layer, corundum layer and ceramic adhesive layer. From the surface, the internal ceramic layer is white. Ceramics are generally 95 ceramics, and the temperature is generally lower than 200 ℃. High wear resistance and long service life.Ceramic Lined Carbon Steel Pipe High Wear resistant Hardox Wear plate Wear Resistant Hardox Plate 6on6 Hardox Wear Plate 
High Wear resistant Hardox Wear Plate
At present, the commonly used ceramic composite pipe lining ceramic plates are: ceramic block, dovetail mutual pressure, welding type, mosaic, card slot, etc.

 resistant pipeline of ceramic chip coal washing plant  Coal washing plant pipeline  Slime water wear-resistant pipeline  Aluminum oxide Wear Resistant Pipe

  Product performance     

1. Large hardness

   Rockwell hardness HRV 80-90

2. High wear resistance

   Wear resistance is equivalent to 20-30 times of high manganese steel

3. Ceramic Lined Carbon Steel Pipe Light weight

   Its density is 3.9g/cm³, which is only half that of steel, which can greatly reduce the equipment load

4. Ceramic Lined Steel Pipe Imported glue

   Magbao imported glue, bonding strength: 10Mpa, working temperature: -60℃ to +250℃, welding type, wear resistance up to 800℃

  Specifications  

Technical parameters of wear-resistant ceramic pipes

Brand: Jianghe

Manufacturer: Jiangsu Jianghe Machinery Manufacturing Co., Ltd.

Pipe diameter: ≥DN100

Steel pipe thickness: ≥4mm

Steel pipe material: Q235 or stainless steel

Ceramic thickness: 4mm, 6mm, 8mm, 10mm, etc.

Connection method: flange, welding, casing, V-connector

Working pressure: ≤1.0MPa (other pressures need to be communicated with customer service)

  Ceramic sheet technical indicators  

     Ceramic marking: 92-95

     Bulk density: 3.9g/cm³

    Tensile strength: 1030MPa

    Flexural strength: 212MPa

Hardness HRV: 80-90

  Manufacturer Service  

1. Free technical answers

2. Free CAD or 3D drawing

3. Paid surveying and mapping services