Is Ceramic Patch Wear-resistant Elbow expensive

The Ceramic Wear Resistant Elbow used in coal mines is made of ceramic patches. Ceramic Pipe Fittings have an outer steel pipe which is also an ordinary steel pipe on the outside, and a ceramic patch on the inside. Ceramic Lined Steel Pipe is produced using the JH3.0 patch process. Purchased The imported glue makes the porcelain pieces firm and does not fall off. The unique welding technology is used to extend the service life, save maintenance and labor costs, reduce the frequency of overhauls and repairs, and ensure the normal operation of the company in the long term. Ceramic patch wear-resistant elbow manufacturers can provide an overall wear-resistant solution when producing this Ceramic Lined Pipe, which can save a lot of engineering costs.

The inner Ceramic Lined Pipe is composed of three layers: the outer steel pipe layer, the corundum layer, and the ceramic adhesive layer. The inner ceramic layer of Ceramic Pipe Fittings is white from the surface. Ceramics are generally 95 ceramics, and the temperature is generally below 200 °C.
At present, the common ceramic sheets for Ceramic Lined Steel Pipe lining are: ceramic block, dovetail mutual pressure, welded type, inlaid type, slotted type, etc., which have the characteristics of wear resistance and long service life.

  Product performance  

1. Large hardness

   Rockwell hardness HRV 80-90

2. High wear resistance

   Wear resistance is equivalent to 20-30 times of high manganese steel

3. Light weight

   Its density is 3.9g/cm³, which is only half that of steel, which can greatly reduce the equipment load

4. Imported glue

   Magbao imported glue, bonding strength: 10Mpa, working temperature: -60℃ to +250℃, welding type, wear resistance up to 800℃

  Specifications  

Technical parameters of wear-resistant ceramic pipes

Brand: Jianghe

Manufacturer: Jiangsu Jianghe Machinery Manufacturing Co., Ltd.

Pipe diameter: ≥DN100

Steel pipe thickness: ≥4mm

Steel pipe material: Q235 or stainless steel

Ceramic thickness: 4mm, 6mm, 8mm, 10mm, etc.

Connection method: flange, welding, casing, V-connector

Working pressure: ≤1.0MPa (other pressures need to be communicated with customer service)

  Ceramic sheet technical indicators  

     Ceramic marking: 92-95

     Bulk density: 3.9g/cm³

    Tensile strength: 1030MPa

    Flexural strength: 212MPa

Hardness HRV: 80-90

  Manufacturer Service  

1. Free technical answers

2. Free CAD or 3D drawing

3. Paid surveying and mapping services