Large Caliber Ceramic Wear Resistant Elbow

Can Ceramic Lined Steel Pipedn80 be produced? Of course it can, but not all of the two Ceramic Lined Pipes mentioned above can be produced. Considering that the inner lining of the ceramic patch wear-resistant pipe is made of artificially pasted ceramic sheets, ceramic patches such as Ceramic Pipe Fittingsdn80 cannot be made. Generally, it cannot be produced below DN150. Ceramic Lined Carbon Steel Pipedn80 We can choose another Self-propagating Wear Resistant Pipe with a self-propagating centrifugal casting process. This pipe has a temperature resistance of up to 900°C, is light in weight, and can be cut and welded at will!

  Product Introduction   

Ceramic Abrasion Resistant Pipe Fittings consists of three layers: outer layer of steel pipe, corundum layer and wear lines ceramic bonding layer. The internal ceramic layer is white. Ceramics are generally 95 ceramics, with temperature resistance of 250 ℃, high wear resistance and long service life. The commonly used ceramic composite pipe lining ceramic plates include: ceramic block, dovetail mutual pressure, welding type, mosaic, card slot and other nm450 high wear-resistant steel plates. Ceramic Lined Steel Pipe adopts dislocation patch technology, so that the ceramic sheet is not easy to fall off.

  Product performance  

1. Large hardness

   Rockwell hardness HRV 80-90

2. High wear resistance

   Wear resistance is equivalent to 20-30 times of high manganese steel

3. Light weight

   Its density is 3.9g/cm³, which is only half that of steel, which can greatly reduce the equipment load

4. Imported glue

   Magbao imported glue, bonding strength: 10Mpa, working temperature: -60℃ to +250℃, welding type, wear resistance up to 800℃

  Specifications  

Technical parameters of wear-resistant ceramic pipes

Brand: Jianghe

Manufacturer: Jiangsu Jianghe Machinery Manufacturing Co., Ltd.

Pipe diameter: ≥DN100

Steel pipe thickness: ≥4mm

Steel pipe material: Q235 or stainless steel

Ceramic thickness: 4mm, 6mm, 8mm, 10mm, etc.

Connection method: flange, welding, casing, V-connector

Working pressure: ≤1.0MPa (other pressures need to be communicated with customer service)

  Ceramic sheet technical indicators  

     Ceramic marking: 92-95

     Bulk density: 3.9g/cm³

    Tensile strength: 1030MPa

    Flexural strength: 212MPa

Hardness HRV: 80-90

  Manufacturer Service  

1. Free technical answers

2. Free CAD or 3D drawing

3. Paid surveying and mapping services