Stainless steel wear protection tile

Tube Shields shape and specification
   The section shape of Tubes Erosion Shields is mostly semi-circular (180 degrees), and there are also 120-160 degrees, which are mainly used on tubes with fins (water wall); anti-wear tiles are divided into straight anti-wear tiles, inward bending Anti-abrasion tile, outer curved anti-abrasion tile, side curved anti-abrasion tile, S-bend Boiler Tubes Erosion Shields, etc. The length of the straight anti-abrasion tile varies from 20mm to 3000mm, and the general length of 1000-2000mm is more common; the curved anti-abrasion tile generally requires processing drawings, and the drawings must have the following parameters: the outer diameter of the pipe used, the bending of the pipe used Radius R (to the center of the tube), bend angle in degrees and straight lengths on both sides of the arc of Stainless Steel Erosion Shields. The most basic parameter of the anti-abrasion tile is the outer diameter φ of the pipe used (that is, the inner diameter of the anti-abrasion tile). , 89mm, etc.; the inner diameter of Half Round Shield For Boiler Tube is usually 1-3mm larger than the outer diameter of the tube used, depending on actual requirements.